请问哪些朋友在钻井公司工作或有熟人，求帮忙介绍工作或者给一点求职建议

鋼の魂 · 发表于 2013-10-28 06:05

想要做钻井这一行，因为是新手可以从floorhand或leasehand做起，该有的tickets都有，对石油行业有了解及具备一定的钻井知识，就是没经验。之前投了很多简历都没回复，所以能帮忙介绍最好，没有介绍也请QQ加个好友给一点求职建议。QQ: 2580970248 或邮箱：gundam0080@yeah.net
谢谢各位了。

补充内容 (2013-10-29 15:30):
all positions that related to petroleum can be accepted, such as oil field technician, well testing operator.

happyzena · 发表于 2013-10-28 07:45

你先搞个容易记的邮箱吧

20130503 · 发表于 2013-10-28 08:17

邮箱太不正常了。中国人认识拼音，会读成滚蛋

老外会读成 gun down ，我理解是撂倒

都不是正常的邮箱。年轻人耍酷的心理可以理解，但找工作，还是严肃一点吧。

kelvin · 发表于 2013-10-28 11:26

那是钢弹勇士刚达姆机器人好不好。

反而是yeah这个邮箱网站一看就是收垃圾邮件的，让人感觉没有诚意。

NEB · 发表于 2013-10-28 12:16

working on a drilling rig is a very tough job, high pay but also high risk, unsafe environment. do your homework on this career first before jumping into it.

good luck!

kelvin · 发表于 2013-10-28 14:09

it is 13 hrs non-stop heavy physical work. i feel tough even just look at them.

floor hand starts at $25/hr roughly, however, trust me, it does not worth it. you don't want lose a finger.

Maverick · 发表于 2013-10-28 14:24

kelvin 发表于 2013-10-28 11:26 v/ R. k; S) N# r3 z" Y
那是钢弹勇士刚达姆机器人好不好。
# f' u) n8 m: o) u7 q: q; W6 Q) Q) C$ ]9 o* m$ L, O
反而是yeah这个邮箱网站一看就是收垃圾邮件的，让人感觉没有诚意。 ...

这你都知道？！
太有才了！

美通快递 · 发表于 2013-10-28 15:16

鋼の魂 · 发表于 2013-10-28 15:53

20130503 发表于 2013-10-28 09:17
7 N1 i" G1 J: f4 K2 a" R7 s邮箱太不正常了。中国人认识拼音，会读成滚蛋
. _: v6 V( I4 s* w! Z7 r5 A$ H ~" B: w. i
老外会读成 gun down ，我理解是撂倒

找工作会用其他邮箱，这个论坛专用的小号

鋼の魂 · 发表于 2013-10-28 15:57

本帖最后由鋼の魂于 2013-10-28 17:15 编辑

kelvin 发表于 2013-10-28 12:26
" ^8 F; x/ {( K; N' p那是钢弹勇士刚达姆机器人好不好。( f* U7 F) u1 E6 P) r! I1 }

# L& [. }3 z6 i/ e5 {反而是yeah这个邮箱网站一看就是收垃圾邮件的，让人感觉没有诚意。 ...

我现在只是联系一下，如果对方肯帮忙我就会给简历（包括hotmail等联系方式），这个邮箱在各个论坛公开使用就是收垃圾邮件的。所以每星期都有几十封垃圾邮件，而我的hotmail几乎没有

鋼の魂 · 发表于 2013-10-28 16:02

NEB 发表于 2013-10-28 13:16
( f- ?$ I! Z ?! \working on a drilling rig is a very tough job, high pay but also high risk, unsafe environment. do y ...

Thank you for your reply. I'm fresh graduate. to start my career in oil and gas industry, I have to do such job to gain work experience.

kelvin · 发表于 2013-10-28 16:08

鋼の魂发表于 2013-10-28 16:02 4 d4 r2 b1 E2 B) k6 t: _. N
Thank you for your reply. I'm fresh graduate. to start my career in oil and gas industry, I have t ...

no, you don't have to be a floor hand. you know you better than that......

鋼の魂 · 发表于 2013-10-28 16:14

kelvin 发表于 2013-10-28 15:09 0 o' I. Y- X1 M) j8 Z6 s
it is 13 hrs non-stop heavy physical work. i feel tough even just look at them.
9 E7 c& k- ]0 v! `
/ V& M" C9 `! {' e6 n3 Kfloor hand starts ...

honestly, i dont want to do such work, but i have no choice, do you have any idea on how to get work experience in oil and gas industry for fresh graduate?

NEB · 发表于 2013-10-28 16:16

what did you study in? a fresh graduate from what? where do you plan to take your career to?

kelvin · 发表于 2013-10-28 16:17

鋼の魂发表于 2013-10-28 16:14 . q* z; T' i% z( q/ l
honestly, i dont want to do such work, but i have no choice, do you have any idea on how to get wo ...

major?

Jack8 · 发表于 2013-10-28 16:22

这工作一般只在冬天，非常非常冷，戴3双手套，手指任然觉得麻木。大都是年轻力壮的小伙干的，且多数人干不长。另外，收入也不太高，真的很不值得。在industry field 的 labor 比 leasehand 收入高，且轻松千倍!另外，如果有兴趣，你可以到 local 126 在 Edmonton,有一个免费的2 weeks 的 pre-apprenticeship cource，叫 boilermaker apprentice,学徒期3年。Journey man pay rate 应该是约$56 dollars /an hour 。该工会会负责帮你找工作及注册学徒。如果通过了所有考试，最后有一个约280刀的体能测试。你也就是付这个费用，便可以上课了。注意，千万不要迟到(2次以上会被开除，然后你得等一年)!

kelvin · 发表于 2013-10-28 16:25

本帖最后由 kelvin 于 2013-10-28 16:26 编辑

烧锅炉不是oil & gas 啊

Jack8 · 发表于 2013-10-28 16:42

错， Boiler maker 应该正是在 oil&gas field.
另外，有点小错，不是local 126(那是canada最好的工会)，应该是---local 146.
你只要在网上打上--local 146,就会有所有信息。

Michael98 · 发表于 2013-10-28 19:30

Jack最近还好？我手机换了，现在是780-909-4968

Jack8 · 发表于 2013-10-28 20:31

我很好。谢谢, Michael !

kelvin · 发表于 2013-10-29 07:17

you can also apply oil company, start as a battery operator. much easier, less physical.

you are welcome

NEB · 发表于 2013-10-29 07:25

why don't you try and apply as an operator for an oil and gas company?

亮甲店 · 发表于 2013-10-29 09:36

LZ你体格好么？80，90%中国人干不了这个工作，
我严重怀疑你干不了floor hand,多吃点蛋白粉练壮点

SheJing · 发表于 2013-10-29 09:38

I dont drill wells, but i drill holes.

kelvin · 发表于 2013-10-29 09:58

all kinds of holes????

NEB · 发表于 2013-10-29 10:21

to drill holes is easy, to complete it properly with the right casings and tubings is a different story

鋼の魂 · 发表于 2013-10-29 10:39

NEB 发表于 2013-10-29 08:25
8 L" u1 n \% b( a7 T$ T$ C/ zwhy don't you try and apply as an operator for an oil and gas company?

of course, i did. floorhand is one option

鋼の魂 · 发表于 2013-10-29 10:43

NEB 发表于 2013-10-29 11:21
# R* y% T2 H" L5 q3 N; P1 uto drill holes is easy, to complete it properly with the right casings and tubings is a different st ...

yes, some completion jobs require Class 3 or 1 driver license

natson · 发表于 2013-10-29 18:24

我原来有个同事干过这个，这人是本地体育生，190多，说他有一次300米的距离在有铁链的情况下差点迷路，迷路估计就会挂，那的多大的暴风雪

鋼の魂 · 发表于 2013-11-3 05:59

账号		自动登录	找回密码
密码			注册

请问哪些朋友在钻井公司工作或有熟人，求帮忙介绍工作或者给一点求职建议

浏览过的版块