请教如何自己建车库

逆水行舟 · 发表于 2007-6-14 20:06

刚买了房子,可是没有车库, 不知哪位曾经自己建过车库,或有这方面经验的, 诚心请教.先谢谢了!

francais · 发表于 2007-6-15 13:02

应该先申请licence吧。然后找个builder,这东西自己指定弄不了。最好请教一下子你的经纪人。

TempID · 发表于 2007-6-15 15:18

buy a kit from homedepot. If you are building a two-car garage. You need at least two men to do the frame, take about 2 days if work full time. You need 2 weeks (parttime) to finish window, shingle, siding and paint.

逆水行舟 · 发表于 2007-6-15 20:49

谢谢，这是一个好的建议．我想知道如何做加热系统和电路系统．请具体指点指点．多谢多谢！！

逆水行舟 · 发表于 2007-6-15 20:52

谢谢．但是不知道在哪里可以申请到licence.

howardx · 发表于 2007-6-15 21:48

1.Concrete Foundation:
a.land Flating: Need roller and pressor and get earth compaction index to civil technical requirement
b.Footings: need about 16"x8"footing reinforced with 3-15M steel Rebar continuously and 15M transverse rebar at 12" spacing
c. Concrete wall: about 8" wide by 36" heigh reinfored with 15M vertical rebar at 12" spacing and 3-15M horizontal rebar
d. Slab: about 5"-6" slab reinforced with 10M rebar at 12" spacing each way
e. order concrete mix from Lafarge or Inland concrete ready mix
f.pour concrete first footing, wall and last slab.

After 3days later (better 7days) you can start framing with wood and dry wall, and insulatin materials

All of them you need have roughly design and sketch. Estimate materials.

howardx · 发表于 2007-6-15 22:02

You can go to Edmonton.ca website and then you can apply for permit thru web

howardx · 发表于 2007-6-15 22:12

原帖由 howardx 于 2007-6-15 22:48 发表 3 ]$ w8 Y' J) {* W1 W" n9 {& c
1.Concrete Foundation:0 z) Y b2 w, y5 R
a.land Flating: Need roller and pressor and get earth compaction index to civil technical requirement
; ~! a+ p# @$ {1 W( _1 Jb.Footings: need about 16"x8"footing reinforced with 3-15M steel Re ...

Wood framing you either go to home depot or trust fabricateor company order the size

For side framing you need 9' heigh spacing at 3'-5'.
For dry wall you order compacted wood compound as your size
For truss you have to order truss from truss fabricating company

Then you can naill compacted wood compound(1.5" to 2") to the wall framing, and to the roof (1")
Last you can order asphalt shingle.

Off course you need layout your electrical wire.

Before you framing you need to know how big for your overhead door.

逆水行舟 · 发表于 2007-6-16 08:27

非常感谢，看来建车库不是件容易的事，以前想得有点简单了．希望能向６楼这位专业人士进一步了解．

francais · 发表于 2007-6-16 23:48

原帖由 逆水行舟 于 2007-6-15 21:52 发表 4 P9 j# M2 c' }
谢谢．但是不知道在哪里可以申请到licence.

所有的licence都去 edmonton.ca 查找。进去输入关键词也许可以找到。

Angel_DuDu · 发表于 2007-6-17 06:52

学习了。

苹果鸭梨 · 发表于 2007-6-17 06:58

刚帮朋友建了新车库, 整个过程做了一遍. 你建时如需要帮手, 可联络我.

angelqi · 发表于 2013-8-6 05:35

刚买的房子,没有车库, 准备自建，谁有经验，可以介绍一下需要的人力吗？从网上视频看了一点，感觉自建很困难？请教了，多谢。

ceramistpalace · 发表于 2013-8-6 22:55

Packages available at home improvement stores, such as homedepot, totem.

yuzhenli · 发表于 2013-8-7 02:48

刚帮朋友建了一个20'x 20', 10 ft 高的车库（标准车库 8ft 高），建有很大的 storage on the top, 车库的电也是我做的。如果需要帮忙，可联系我@780-952-5698。

angelqi · 发表于 2013-8-11 08:15

今天去TOTEM看PACKAGE才知道TOTEM已经被RONA收购了，TOTEM和HOMEDEPOT的PACKAGE价格都要7000多，不知他们何时会有DISCOUNT，我要9月份搬家。谢谢回复。

joeli500 · 发表于 2013-8-17 16:29

准备明后年建个车库，mark一下，可能到时候会联系楼上几位，提前谢谢了。

账号		自动登录	找回密码
密码			注册

请教如何自己建车库

回复 #3 TempID 的帖子

回复 #2 francais 的帖子

Procedures for building Garage

回复 #5 逆水行舟的帖子

Procedures for building garage

回复 #6 howardx 的帖子

浏览过的版块

请教如何自己建车库

回复 #3 TempID 的帖子

回复 #2 francais 的帖子

Procedures for building Garage

回复 #5 逆水行舟 的帖子

Procedures for building garage

回复 #6 howardx 的帖子

浏览过的版块

回复 #5 逆水行舟的帖子