请问哪些朋友在钻井公司工作或有熟人，求帮忙介绍工作或者给一点求职建议

鋼の魂 · 发表于 2013-10-28 06:05

想要做钻井这一行，因为是新手可以从floorhand或leasehand做起，该有的tickets都有，对石油行业有了解及具备一定的钻井知识，就是没经验。之前投了很多简历都没回复，所以能帮忙介绍最好，没有介绍也请QQ加个好友给一点求职建议。QQ: 2580970248 或邮箱：gundam0080@yeah.net
谢谢各位了。

补充内容 (2013-10-29 15:30):
all positions that related to petroleum can be accepted, such as oil field technician, well testing operator.

happyzena · 发表于 2013-10-28 07:45

你先搞个容易记的邮箱吧

20130503 · 发表于 2013-10-28 08:17

邮箱太不正常了。中国人认识拼音，会读成滚蛋

老外会读成 gun down ，我理解是撂倒

都不是正常的邮箱。年轻人耍酷的心理可以理解，但找工作，还是严肃一点吧。

kelvin · 发表于 2013-10-28 11:26

那是钢弹勇士刚达姆机器人好不好。

反而是yeah这个邮箱网站一看就是收垃圾邮件的，让人感觉没有诚意。

NEB · 发表于 2013-10-28 12:16

working on a drilling rig is a very tough job, high pay but also high risk, unsafe environment. do your homework on this career first before jumping into it.

good luck!

kelvin · 发表于 2013-10-28 14:09

it is 13 hrs non-stop heavy physical work. i feel tough even just look at them.

floor hand starts at $25/hr roughly, however, trust me, it does not worth it. you don't want lose a finger.

Maverick · 发表于 2013-10-28 14:24

kelvin 发表于 2013-10-28 11:26
( G l1 G( m" V/ u" H7 }那是钢弹勇士刚达姆机器人好不好。" D* w# R6 Y5 K: u

, Y3 Y g0 C2 Y9 G反而是yeah这个邮箱网站一看就是收垃圾邮件的，让人感觉没有诚意。 ...

这你都知道？！
太有才了！

美通快递 · 发表于 2013-10-28 15:16

鋼の魂 · 发表于 2013-10-28 15:53

20130503 发表于 2013-10-28 09:17 ! a+ F8 D9 u4 ~
邮箱太不正常了。中国人认识拼音，会读成滚蛋
S$ S; c4 w5 A4 s9 C0 I) S
& Q! ?# o$ P# }! c/ Y+ s$ H5 `老外会读成 gun down ，我理解是撂倒

找工作会用其他邮箱，这个论坛专用的小号

鋼の魂 · 发表于 2013-10-28 15:57

本帖最后由鋼の魂于 2013-10-28 17:15 编辑

kelvin 发表于 2013-10-28 12:26 8 c; \* f7 e) h e0 U, j+ T& u3 |
那是钢弹勇士刚达姆机器人好不好。. }2 y6 U; N; |8 v) @1 S
* F( u7 q+ ~) v6 L- {' M0 [' Y$ G
反而是yeah这个邮箱网站一看就是收垃圾邮件的，让人感觉没有诚意。 ...

我现在只是联系一下，如果对方肯帮忙我就会给简历（包括hotmail等联系方式），这个邮箱在各个论坛公开使用就是收垃圾邮件的。所以每星期都有几十封垃圾邮件，而我的hotmail几乎没有

鋼の魂 · 发表于 2013-10-28 16:02

NEB 发表于 2013-10-28 13:16 ! m2 s4 P+ e8 S: B* w! U3 G' h( ?; E
working on a drilling rig is a very tough job, high pay but also high risk, unsafe environment. do y ...

Thank you for your reply. I'm fresh graduate. to start my career in oil and gas industry, I have to do such job to gain work experience.

kelvin · 发表于 2013-10-28 16:08

鋼の魂发表于 2013-10-28 16:02 3 K# d5 t. X9 H
Thank you for your reply. I'm fresh graduate. to start my career in oil and gas industry, I have t ...

no, you don't have to be a floor hand. you know you better than that......

鋼の魂 · 发表于 2013-10-28 16:14

kelvin 发表于 2013-10-28 15:09
2 S D) |4 S- s3 s. l. {3 Y) P0 uit is 13 hrs non-stop heavy physical work. i feel tough even just look at them.
" k3 F, C6 U9 Y" u7 Q2 p' J" C) n: y6 }. ^% V
floor hand starts ...

honestly, i dont want to do such work, but i have no choice, do you have any idea on how to get work experience in oil and gas industry for fresh graduate?

NEB · 发表于 2013-10-28 16:16

what did you study in? a fresh graduate from what? where do you plan to take your career to?

kelvin · 发表于 2013-10-28 16:17

鋼の魂发表于 2013-10-28 16:14
; G/ C' K$ F8 t- ?honestly, i dont want to do such work, but i have no choice, do you have any idea on how to get wo ...

major?

Jack8 · 发表于 2013-10-28 16:22

这工作一般只在冬天，非常非常冷，戴3双手套，手指任然觉得麻木。大都是年轻力壮的小伙干的，且多数人干不长。另外，收入也不太高，真的很不值得。在industry field 的 labor 比 leasehand 收入高，且轻松千倍!另外，如果有兴趣，你可以到 local 126 在 Edmonton,有一个免费的2 weeks 的 pre-apprenticeship cource，叫 boilermaker apprentice,学徒期3年。Journey man pay rate 应该是约$56 dollars /an hour 。该工会会负责帮你找工作及注册学徒。如果通过了所有考试，最后有一个约280刀的体能测试。你也就是付这个费用，便可以上课了。注意，千万不要迟到(2次以上会被开除，然后你得等一年)!

kelvin · 发表于 2013-10-28 16:25

本帖最后由 kelvin 于 2013-10-28 16:26 编辑

烧锅炉不是oil & gas 啊

Jack8 · 发表于 2013-10-28 16:42

错， Boiler maker 应该正是在 oil&gas field.
另外，有点小错，不是local 126(那是canada最好的工会)，应该是---local 146.
你只要在网上打上--local 146,就会有所有信息。

Michael98 · 发表于 2013-10-28 19:30

Jack最近还好？我手机换了，现在是780-909-4968

Jack8 · 发表于 2013-10-28 20:31

我很好。谢谢, Michael !

kelvin · 发表于 2013-10-29 07:17

you can also apply oil company, start as a battery operator. much easier, less physical.

you are welcome

NEB · 发表于 2013-10-29 07:25

why don't you try and apply as an operator for an oil and gas company?

亮甲店 · 发表于 2013-10-29 09:36

LZ你体格好么？80，90%中国人干不了这个工作，
我严重怀疑你干不了floor hand,多吃点蛋白粉练壮点

SheJing · 发表于 2013-10-29 09:38

I dont drill wells, but i drill holes.

kelvin · 发表于 2013-10-29 09:58

all kinds of holes????

NEB · 发表于 2013-10-29 10:21

to drill holes is easy, to complete it properly with the right casings and tubings is a different story

鋼の魂 · 发表于 2013-10-29 10:39

NEB 发表于 2013-10-29 08:25
% z. E2 [9 n! m4 o7 E. Hwhy don't you try and apply as an operator for an oil and gas company?

of course, i did. floorhand is one option

鋼の魂 · 发表于 2013-10-29 10:43

NEB 发表于 2013-10-29 11:21
, i. u/ I0 n3 \7 `4 mto drill holes is easy, to complete it properly with the right casings and tubings is a different st ...

yes, some completion jobs require Class 3 or 1 driver license

natson · 发表于 2013-10-29 18:24

我原来有个同事干过这个，这人是本地体育生，190多，说他有一次300米的距离在有铁链的情况下差点迷路，迷路估计就会挂，那的多大的暴风雪

鋼の魂 · 发表于 2013-11-3 05:59

账号		自动登录	找回密码
密码			注册

请问哪些朋友在钻井公司工作或有熟人，求帮忙介绍工作或者给一点求职建议

浏览过的版块